Eugene Textile Center   1510 Jacobs Drive, Eugene OR

Directions & Hours | Contact | 541-688-1565

Standard Jack Looms and Accessories

Schacht Standard floor loom comes in two styles: The Standard Low Castle and The Standard High Castle. Though both looms take up identical floor space, the lower profile of the Low Castle model appears visually smaller. A High Castle loom includes a storage tray and holes drilled in the top of the castle uprights for the swivel pin of an extension lamp, otherwise the looms function the same. Both the Standard Low Castle and the Standard High Castle looms are available in 36" and 46" wide weaving widths.

All Standard floor looms may be ordered with eight or Four Now-Four Later* shaft options. The number of shafts you choose will depend on the kind of weaving you intend to do. Though most weave structures can be woven on four shafts, additional shafts increase your pattern options extensively. If you have a keen interest in pattern drafting and weave structures, eight shafts will allow you to fully develop this interest.

See details 36” Standard Jack Looms Our Standard floor loom comes in two styles: The Standard Low Castle and The Standard High Castle. Though both looms... Price: Price Varies 36” Standard Jack Looms Choose 8 Shaft - 36" Maple Low Castle [$3,415.00] 8 Shaft - 36" Cherry Low Castle [$4,101.00] 4 Now - 4 Later - 36" Maple Low Castle [$2,671.00] 4 Now - 4 Later - 36" Cherry Low Castle [$3,320.00] 8 Shaft - 36" Maple High Castle [$3,610.00] 8 Shaft - 36" Cherry High Castle [$4,365.00] 4 Now - 4 Later - 36" Maple High Castle [$2,867.00] 4 Now - 4 Later - 36" Cherry High Castle [$3,615.00] Reed None 36" Stainless Steel Reed 6 Dent 36" Stainless Steel Reed 8 Dent 36" Stainless Steel Reed 10 Dent 36" Stainless Steel Reed 12 Dent 36" Stainless Steel Reed 15 Dent 36" Stainless Steel Reed 20 Dent Heddles None Flat Stainless Steel Heddles/100 Schacht Texsolv Heddles/100 Brown Inserted Eye Heddles/100 Qty:

See details 46" Standard Jack Looms Our Standard floor loom comes in two styles: The Standard Low Castle and The Standard High Castle. Though both looms... Price: Price Varies 46" Standard Jack Looms Choose 8 Shaft - 46" Maple Low Castle [$3,927.00] 8 Shaft - 46" Cherry Low Castle [$4,820.00] 4 Now - 4 Later - 46" Maple Low Castle [$3,193.00] 4 Now - 4 Later - 46" Cherry Low Castle [$3,963.00] 8 Shaft - 46" Maple High Castle [$4,150.00] 8 Shaft - 46" Cherry High Casstle [$5,034.00] 4 Now - 4 Later - 46" Maple High Castle [$3,386.00] 4 Now - 4 Later - 46" Cherry High Castle [$4,117.00] Reeds None 46" Stainless Steel Reed 6 Dent 46" Stainless Steel Reed 8 Dent 46" Stainless Steel Reed 10 Dent 46" Stainless Steel Reed 12 Dent 46" Stainless Steel Reed 15 Dent 46" Stainless Steel Reed 20 Dent Heddles None Flat Stainless Steel Heddles/100 Schacht Texsolv Heddles/100 Brown Inserted Eye Heddles/100 Qty:

See details Sectional Warping Tools - Standard Our sectional beams are easily assembled and can be installed on the existing warp beam of your Schacht loom at... Price: Price Varies Sectional Warping Tools Choose 36" Sectional Beam Maple [$218.00] 36" Sectional Beam Cherry [$236.00] 46" Sectional Beam Maple [$249.00] 46" Sectional Beam Cherry [$264.00] Qty:

See details Double Back Beams - Standard To facilitate different warp tensions for weave structures such as warp pile, supplementary warp, and Bedford cord. A double back... Price: Price Varies Double Back Beams Choose 36" Double Back Beam Maple [$567.00] 36" Double Back Beam Cherry [$608.00] 46" Double Back Beam Maple [$587.00] 46" Double Back Beam Cherry [$639.00] Qty:

See details Four Later Shaft Kits - Standard *"Four Now - Four Later" (4N4L) is an eight harness loom shipped with only four harnesses installed, but with the... Price: Price Varies Four Later Shaft Kits Choose 4 Later Kit - 36" Maple [$805.00] 4 Later Kit - 36" Cherry [$863.00] 4 Later Kit - 46" Maple [$816.00] 4 Later Kit - 46" Cherry [$953.00] Qty: